Finishing Fillets
Consider these finish-machining techniques that can enable you to maximize material removal rates prior to completing accurate, tight-radii fillets.
Share
Here’s one method of finishing a fillet using an 80-degree insert.
Just because a pocket calls for a fillet with a tight radius doesn’t mean the entire thing should be rough-machined with a tool having that radius. As cutting tool manufacturer explains, radii like these typically are small. Therefore, a tool having such a radius is generally weak and must be indexed or changed numerous times if the plan is to use it to complete the entire operation. However, there are a number of effective methods available to finish fillet radii after performing roughing operations using a different, more appropriate tool. The company highlights four of them .
Related Content
-
Shoulder Milling Cuts Racing Part's Cycle Time By Over 50%
Pairing a shoulder mill with a five-axis machine has cut costs and cycle times for one of TTI Machine’s parts, enabling it to support a niche racing community.
-
Toolpath Improves Chip Management for Swiss-Type Lathes
This simple change to a Swiss-type turning machine’s toolpath can dramatically improve its ability to manage chips.
-
Orthopedic Event Discusses Manufacturing Strategies
At the seminar, representatives from multiple companies discussed strategies for making orthopedic devices accurately and efficiently.