Clamping System Mounting Enables Five-Sided Machining
Carr Lane Roemheld’s DropZero modular zero-point clamping system is said to enable a user to machine a workpiece in one setup.
Share
Carr Lane Roemheld’s DropZero modular zero-point clamping system is said to enable a user to machine a workpiece in one setup. The system locates, supports and clamps the workpiece from underneath, enabling full machining access to five sides.
Pull studs (round, diamond and floating) are mounted directly to a part, and clamping modules can be mounted to the fixturing plate, elevating the workpiece for machine-spindle clearance. Clamp modules are stackable for added clearance, and are said to fit on all of the company’s ½" and 5/8" modular tooling plates and blocks. According to the company, they can also be used with non-modular tooling.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Shoulder Milling Cuts Racing Part's Cycle Time By Over 50%
Pairing a shoulder mill with a five-axis machine has cut costs and cycle times for one of TTI Machine’s parts, enabling it to support a niche racing community.
-
Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success
Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.