Collets and Guide Bushings for Swiss Workholding
Hardinge Workholding has expanded its range of products for workholding in Swiss-type machining with additional collets and guide bushings.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
Hardinge Workholding has expanded its range of products for workholding in Swiss-type machining with additional collets and guide bushings. The company now offers P16C, P20C and P25C collets, along with corresponding P16D, P20D and P25D guide bushings for the Nomura line of CNC Swiss-type lathes. Available in round, hexagon and square sizes, the line of collets and guide bushings will cover nearly all Nomura Swiss-type turning machine models, the company says. Additionally, Hardinge offers long-bearing carbide guide bushings including the TD25, TD25S, TD26, TD32, TD32S and 0201, which were previously only available as special orders. The round guide bushings are carbide-lined to keep stock clean and unmarked. Their extended length provides the additional contact surface required for long parts, the company says.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Toolpath Improves Chip Management for Swiss-Type Lathes
This simple change to a Swiss-type turning machine’s toolpath can dramatically improve its ability to manage chips.
-
Shoulder Milling Cuts Racing Part's Cycle Time By Over 50%
Pairing a shoulder mill with a five-axis machine has cut costs and cycle times for one of TTI Machine’s parts, enabling it to support a niche racing community.