Share
Thinbit MiniGroove ‘N Turn inserts are configured such that the same insert can be used for internal grooving, face grooving, profiling or boring. Equipped with a customized clamping system, the inserts have a built-in stop to prevent slippage and rotation during axial or radial cuts.
Ìý
The inserts are available in groove widths ranging from 0.004" to 0.125" in 0.001" increments, with either sharp corners or corner radius. Two sub-micron grain carbide grades—DM-2 for steel and interrupted cutting and DM-5 for aluminum and other non-ferrous alloys—are offered. TiN, TiCN, TiAIN and diamond coatings are available, as are specialized configurations to meet various application needs.
Ìý
Round toolholders are offered in 1/4", 3/8", 1/2", 5/8" and 3/4" in materials such as steel, heavy metal and carbide.
Ìý
Ìý
Ìý
Related Content
-
Briquetting Manufacturer Tools Up for Faster Turnaround Times
To cut out laborious manual processes like hand-grinding, this briquette manufacturer revamped its machining and cutting tool arsenal for faster production.
-
Custom Workholding Principles to Live By
Workholding solutions can take on infinite forms and all would be correct to some degree. Follow these tips to help optimize custom workholding solutions.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.