Machining Center Cuts Large Parts
Omax’s 80X JetMachining center is designed to cut large parts.
Share
Omax’s large-scale 80X JetMachining center is designed to cut large parts and multiple parts. It features a 50-hp EnduroMax direct-drive pump designed to increase hydraulic power at the cutting nozzle and improve jet-stream control. It also is equipped with a Tilt-a-Jet taper-removal cutting head, which is said to offer high-precision taper compensation to achieve perfectly square part edges. The waterjet featues13 ft. 4" × 6 ft. 8" X-Y cutting travel.
The company’s Maxiem 1530 JetCutting center features a 40-hp Maxiem direct-drive pump and an A-jet accessory to bevel edges at specific angles. The waterjet features 10 ft. 2" × 5 ft. 2" travel on the X-Y axis.
Related Content
-
4 Commonly Misapplied CNC Features
Misapplication of these important CNC features will result in wasted time, wasted or duplicated effort and/or wasted material.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.