Toolholding System Promotes Productivity
The Quick-Change Varia toolholding system from ITI Tooling is designed to improve the productivity of CNC lathes.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
The Quick-Change Varia toolholding system from ITI Tooling is designed to improve the productivity of CNC lathes. Rather than replacing the tool by removing it along with the toolholder or live spindle unit, the workholding system only exchanges a small tool head and cutting tool while large toolholding fixtures and heavy spindle units remain on the lathe. The fast, flexible system accommodates interchangeable tool heads including V3 (VDI 30), V4 (VDI 40) and V5 (VDI50), as well as base mount tooling (BMT), and can be used on a variety of base units and tool spindles.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
T.J. Davies Retention Knobs Maximize Cutting Tool Life
Custom-made retention knobs are sized to fit the machine tool and spindle or toolholder to extend the life of existing machine tool assets.
-
PowRgrip Responds to Three Tooling Trends
Rego-Fix’s PowRgrip tooling system has expanded over the past 20 years to incorporate a wider range of tool sizes, as well as automation.