-
SPONSORED
-
SPONSORED
Machining Centers
Twin-Table Machining Centers For Production Work
The company’s vertical, twin-table machines use dual integrated pallets and are designed for non-stop production performance. One table is accessible for loading or unloading work while the other is safely enclosed in the workzone. The company says this optimizes machine productivity, operator efficiency and safety
Read MoreHMC Designed To Accommodate High Levels Of Torque
Mazak’s HCN 8800-II HMC is built to meet the needs of high productivity for large parts production. It offers a 60-tool storage magazine and a 10,000-rpm, 50-hp integrated spindle/motor generating as much as 900-foot-pounds (1,218-Nm) of torque. Options include 8,000-rpm/50-hp and 16,000-rpm/50-hp spindles. The mac
Read MoreManufacturing Systems Designed For Continuous Or High-Volume Production
The company offers two manufacturing system design approaches for the automotive industry: Agile Systems and the Global Transfer Line. Agile Systems consist of CNC machines and inter-machine part handling automation, built for production of engine blocks, cylinder heads, transmission cases and other parts using eit
Read MoreFive-Axis Machining Center For Tough Materials
The VG5000 five-axis machining center is said to offer stability and accuracy when machining difficult materials such as titanium and stainless and tool steels. Its large cross-roller guideways and cast-iron body offer good damping characteristics, according to the company. The machine features a 50-taper spindle t
Read MoreMachine Medium To Large Parts With Full 50-hp Cuts
The Niigata HN80D HMC machines medium to large parts in a wide range of materials with traverse rates of 1,181 ipm and feed rates of 592 ipm on the box ways. Full 50-hp cuts are achieved through an advanced two-range geared headstock. With only three rotating components, maximum power is transmitted to the cutting
Read MoreHMC Accommodates 1,102-lb Loads
An addition to the company’s Ecoline series of fully featured CNC machine tools designed for job shop use, the DMC H Eco is a compact HMC with X-, Y- and Z-axis travels of 22.1" × 23.6" × 23.6"; a 26.8-hp main drive; spindle speeds to 18,000 rpm; rapid traverse to 1,970 ipm; CAT 40 tooling; a 45-position tool magaz
Read MoreMachining Centers With Five-Axis Capabilities
The company introduces two machining centers, the B 300 and the C 50 U. Available in both three- and five-axis configurations, the B 300 incorporates select elements of the company’s C series machining centers, including gantry design for fast, precise movement; a trunnion table; and a mineral casting base. It feat
Read MoreCompact HMC With VMC-Style Enclosure For Visibility And Access
Horizontal machining centers provide distinct advantages with regard to chip flow, allowing chips to fall away from the machining area for clean cutting conditions and long tool life. Not all shops, however, want or need the pallet-changing capabilities of a production-oriented HMC. For these users, the company has
Read MoreFive-Axis Trimming Of Composites
Here is video of the five-axis motion required to trim a relatively simple composite component.
Read MoreThree Spindle VMC
Developed for the aerospace industry, the Pro-4210TS is a bridge-type VMC with a full cutting range. The machine features three spindles capable of cutting three identical aerospace structural parts simultaneously to save cycle time, operation overhead and increase productivity at the same time. The machine is said
Read More